How to Sharpen a Chainsaw with a Dremel in 2024? A Guide

Richard McMann

Knowledge Based

sharpening chainsaw with a dremelIt’s no secret that a chainsaw is a powerful tool. It can be used to cut through timber and other materials with ease, but for it to function properly, it needs to be kept sharp.

You can use a Dremel to sharpen the chain on your chainsaw, and it’s really not as difficult as you might think.

Just follow these simple steps on how to sharpen a chainsaw with a Dremel and you’ll have a sharp chainsaw in no time!

Step by Step Guide on How to Sharpen a Chainsaw With a Dremel?

1. Choose the right chainsaw for the job 

When it comes to chainsaws, there are a lot of different options to choose from. So, how do you know which one is right for the job? Well, it all depends on what you’re using it for. Here are a few tips to help you choose the right chainsaw for the job:

If you’re mainly using it for home projects, then a smaller chainsaw is probably best. They’re lightweight and easy to use, and they don’t require as much power to operate.

If you’re planning on using the chainsaw for tougher projects, like cutting down trees, then you’ll need a model that has more power. Make sure to choose one that’s durable and can handle heavy-duty use.

Inspect the Chain and Bar for Damage or Wear

Chainsaw chains and bars can become damaged or wear over time, and it’s important to inspect them regularly for any signs of damage. If you notice that the chain or bar is damaged, you’ll need to replace it immediately. Here are a few tips on how to inspect the chain and bar for damage or wear:

-First, make sure the chainsaw is unplugged and cool to the touch.

-Check the chain for any signs of wear or damage. If it’s worn down or cracked, you’ll need to replace it.

-Check the bar for any signs of wear or damage. If it’s bent, twisted, or warped, you’ll need to replace it.

-Make sure the chain is properly attached to the bar. If it’s loose or crooked, you’ll need to tighten it.

2. Remove the bar from the chainsaw 

To sharpen the chain on a chainsaw, you first need to remove the bar from the saw. Here are a few tips on how to do that:

-Pull the bar off of the chainsaw. There should be a lever or button on the side that you can press to release it.

-If the bar is stuck, you can use a hammer or mallet to tap it lose. Be careful not to hit the chain , as that could damage it.

3. Sharpen the chain with a Dremel

Now that the bar is off of the chainsaw, you can use a Dremel to sharpen the chain. Here are a few tips on how to do that:

-First, make sure your Dremel is set to the proper speed setting. For most chainsaws, you’ll need it to be somewhere between 10 and 15.

-Clamp one end of the bar into your vice or workbench so that it doesn’t move.

-Clamp the other end of the bar into your vice or workbench accordingly. Afterward, attach a wire wheel to your Dremel and secure the grinding bit into place. Simply hold the chainsaw in one hand and carefully rotate it as you grind off all of the built-up metal on the chain.

-Note: If you notice any chips or cracks on the metal, stop immediately and replace the chain.

-Once you’ve finished sharpening both edges of the chainsaw, remove it from your vice and workbench, then put your bar back on.

4. Clean any debris from around the chain groove 

One of the most important steps in sharpening a chainsaw is making sure that the chain groove is clean and free of debris. Any dirt or grime can interfere with the sharpening process and cause the chain to become dull again quickly.

To clean the chain groove, you’ll need to remove the bar from the chainsaw. Once it’s off, use a wire brush to clean out all of the dirt and debris. Be sure to pay special attention to the area around the teeth on the chain.

5. Apply a lubricant to the chain groove 

Applying a lubricant to the chain groove is an important step in keeping your chainsaw sharp. It helps to keep the chain running smoothly and prevents it from becoming dull quickly. There are a few different types of lubricants you can use, but WD-40 is a popular choice because it’s affordable and easy to find.

To apply WD-40 to the chain groove, first, remove the bar from the chainsaw. Then, use a wire brush to clean out all of the dirt and debris from the groove. Once it’s clean, apply a thin coating of WD-40 to the inside of the groove. Be sure to avoid getting any on the teeth of the chain, as that could interfere with its performance.

6. Mount the bar back onto the chainsaw 

Now that you’ve finished sharpening the chain, it’s time to put the bar back on the chainsaw. Here are a few tips on how to do that:

-Make sure the chainsaw is unplugged and cool to the touch.

-Align the bar so that the teeth are facing in the same direction as they were before you removed it.

-Push the bar firmly onto the chainsaw until it snaps into place.

7. Tighten all screws and bolts securely 

Once the bar is securely in place, you’ll need to tighten all of the screws and bolts. Be sure to use a torque wrench to ensure that they’re all tightened evenly.

8. Check for proper tension on the chain 

To check the tension on the chain, you’ll need to remove the bar from the chainsaw. Once it’s off, use a torque wrench to ensure that all of the screws and bolts are tightened evenly. Be sure to refer to your chainsaw’s owner’s manual for the correct specifications.

9. Startup the chainsaw and test it out!

After you’ve finished sharpening the chain and putting the bar back on the battery chainsaw, it’s time to start it up and test it out. Here are a few tips on how to do that:

-Align the bar so that the teeth are facing in the same direction as they were before you removed it.

-Push the bar firmly onto the chainsaw until it snaps into place.

-Tighten all screws and bolts securely.

-Check for proper tension on the chain.

-Startup the chainsaw and test it out!

Here is a video guide on how to sharpen a chainsaw with a dremel by themadmailler

Final Takeaways: Sharpening a Chainsaw with a Dremel

If you own a chainsaw, it’s important to keep the chain sharp so that it can do its job as effectively as possible. A Dremel is an affordable tool and an easy way to sharpen your saw blade with minimal effort.

The steps we have mentioned above will help you out in sharpening a chainsaw with the help of a Dremel. Follow them and enjoy hassle-free cutting with your chainsaw all along.

Richard McMann
Follow Me