How to Remove Battery from a Mini Chainsaw? [5 Steps]

Rudy Richard

Knowledge Based

Everyone loves working out with the mini chainsaws until the tool drains all the battery and you are halfway through the cutting process.

Mini chainsaws usually come with a set of two batteries for the sake of easy replacement.

However, removing the battery from a mini saw can become tricky though it’s not that difficult.

Today, I, aka, Rudy Richard, am going to tell you guys how to remove battery from a mini chainsaw in 5 easy steps.

Let’s get started as under:

To remove the battery from a mini chainsaw, first locate the release button on the battery. Then, press and hold the button down while sliding the battery away from the chainsaw to detach it.

How to Remove Battery from a Mini Chainsaw in 5 Simple Steps?

Mini chainsaws are simple so their handling and maintenance are also not complex. Removing a battery from a mini saw is quite easy. Mentioned below are the battery removal instructions for a mini tool, elaborated in 5 easy steps.

how to remove battery from mini chainsaw easily

Step 1: Locate the Release Button:

First of all, you need to turn off the best mini chainsaw and let it cool for a while if you have been working on it. Then, locate the release button on it. The release button is located somewhere on the battery. In some batteries, it is located on the sides, while in others it can be located on the front or facing side.

You have to locate the button by exploring the battery. Moreover, the button is usually more like a pinched surface than an apparent button. Therefore, if you are having difficulty finding the button, you can see the user manual and locate it easily.

Step 2: Press and Hold it Down:

Once you have found the button on a Stihl Garden Pruner, press it. In some batteries, the button is on both sides right below the latch line. So, you need to press on both sides simultaneously. You will feel the battery being loosened as you press the button

Step 3: Release the Button:

The batteries are attached to the mini tools in a sliding manner, like a sliding window. So, as you loosen the battery by pressing the release button, you need to slide the battery. The sliding should be in a manner that you are pulling the battery away from the tool.

You have to keep the button pushed until the battery is completely unhooked from the saw. Once, the battery is completely detached, you can release the button.

Learn More: How Much is a Mini Chainsaw?

Step 4: Pulling the Battery Away from the Device:

After unhooking all the grooves from the device, separate it from the latches by moving the battery by sliding it against the mini saw. Once you are done, you can put the battery on charging to be used again.

To reinstall the battery, you have to repeat the same process in the reverse order.

Step 5: Inspect the Battery:

Once you have separated the battery from the tool, you must inspect it before putting it on charging or storing it. Check for possible damage and see if it is in good condition.

Tips and Warnings for Battery Removal

Here are some tips and warnings that you should be careful about while dealing with battery-powered mini chainsaws. Following the safety measures are always beneficial so here you go.

Read More: How to Oil a Mini Chainsaw?

You should be careful while leaving the battery on charging. You need to be careful about the proper voltage that it requires to charge. Check for a safe connection between the battery and the charger. Also, do not overcharge the battery.

Choose a proper place for storing and charging the battery. Do not store the battery where there is a chance of moisture as it will damage the battery. Also, avoid direct contact with heat or sunlight with the battery, it can cause severe consequences.

How to Remove Battery from Saker Mini Chainsaw?

To remove the battery from a Saker mini chainsaw, you need to carefully turn off the saw. Then, look for the release button which is located right in front of the device, in the same direction as that of the chainsaw bar. You can also look for it in the user manual.

Then, press the release button and it will loosen the grip of the battery against the chainsaw. Pull the battery outwards while holding the mini saw in your right hand. That’s how you will get the Saker mini chainsaw battery detached from the saw.

Frequently Asked Questions

How long does a mini chainsaw battery last?

Some good batteries offer a longer battery time than most of the average batteries. They may run for more than one hour with a full battery. However, an average battery charging on a mini chainsaw lasts for around one hour. Due to this reason, mini tools come with some extra batteries to support the continuity of the task.

Are battery-operated mini chainsaws safe?

Yes, battery-operated mini chainsaws are much safer than electric ones and even gas-operated regular chainsaws. Other chainsaws are difficult to handle due to their size. Also, mini chainsaws have a chain brake, automatic oil lubricator, and other features that make it quite safe for the user.

Though a battery-powered mini chainsaw is safer than others you must follow the safety measures. Ensure that you are wearing safety gloves and other safety equipment. Also, examine the device before you start working.

What is the best battery for a mini chainsaw?

The best mini chainsaw battery is powered by 24 volts and generates 1000mAh of current. These features make the battery powerful and the chainsaw cuts faster and smooth. You can get such a battery with Saker mini chainsaw. Also, this is the reason why the Saker mini chainsaw is considered best.

How thick can a battery-powered mini chainsaw cut?

Up to 10” of bar length is considered a mini chainsaw as it can be operated with one hand. Therefore, with battery operated mini saw you can cut 3 to 6 inches of diameter. However, you can expect more or less depending on the size of the bar you are using. Mostly 4 to 6-inch bar sizes are used for mini chainsaws.

Last Words:

This was all about the demonstration of how you can remove the battery from a mini chainsaw. One thing that I need to remind you of, is the safety measures that you must follow while dealing with any type of chainsaw.

Never touch the chainsaw chain or bar until it is completely powered off. In the case of battery-operated chainsaws, you must remove the battery while dealing with the chainsaw chain or blade. This way, you will avoid the accidental start of the chainsaw and the possible damage it may cause.

I have already told you in detail how you can uninstall the battery from a mini saw. Do follow the steps and do not forget to wear safety gloves and glasses while working with a chainsaw.

Rudy Richard