The chainsaw drive link calculator allows homeowners to calculate the total number of drive links on their tools without any hassle.
Developed by Patrick at Chainsaw Guru, all you have to do is to put the values of chain pitch, chain length, and bar length of your chainsaw. Click on calculate and the calculator will show you the total number of drive links your tool has accordingly.
How to Use a Chainsaw Drive Link Calculator in 2024?
Using the drive link calculator isn’t much difficult. The whole process is as under:
Step 1: Gather the Required Information
Before using a chainsaw drive link calculator, collect the necessary information. You will need the following details:
1. Chain Length: This refers to the total length of the chainsaw chain, usually measured in inches (e.g., 55″, 72″).
2. Chain Pitch: It represents the distance between any three consecutive rivets on the chain divided by two. It is typically measured in inches (e.g., 0.325″, 3/8″, 0.404″).
3. Bar Length: This denotes the length of the chainsaw’s guide bar, usually measured in inches (e.g., 16″, 20″, 24″).
Step 2: Input the Required Values
Enter the gathered information into the designated fields of the chainsaw drive link calculator. Typically, you will need to input the chain length, chain pitch, and bar length into their respective boxes.
Step 3: Calculate the Total Number of Drive Links
After entering the required values, click the “Calculate” button provided by the calculator. The tool will process the data and provide you with the total number of drive links required for your chainsaw chain based on the given parameters.
Step 4: Review the Results
Once the calculation is complete, the chainsaw drive link calculator will display the total number of drive links needed for your chainsaw chain. Take note of this value for reference.
Step 5: Verify Compatibility
Compare the calculated number of drive links with the drive link capacity specified in your chainsaw’s user manual or manufacturer’s recommendations. Ensure that the calculated value falls within the acceptable range to ensure proper functioning and safety.
Step 6: Make Adjustments if Necessary
If the calculated number of drive links exceeds the capacity of your chainsaw, you may need to adjust the chain length or pitch to ensure compatibility. Consult your chainsaw’s user manual or seek professional guidance if needed.
Learn More: Why Were Chainsaws Invented?
Frequently Asked Questions:
How many drive links does a 25-inch chainsaw have?
The number of drive links in a chainsaw chain varies depending on the specific make and model. However, a 25-inch chainsaw commonly has around 84 to 96 drive links.
How many drive links does a 24-inch chainsaw have?
A 24-inch chainsaw typically has approximately 81 to 92 drive links, but the exact number can vary depending on the chainsaw’s make and model.
How many drive links does a 20-inch chainsaw have?
A 20-inch chainsaw usually contains about 66 to 76 drive links, although the exact number may differ based on the make and model of the chainsaw.
How many drive links does an 18-inch chainsaw have?
An 18-inch chainsaw generally comprises approximately 60 to 68 drive links, although the exact number may vary based on the chainsaw’s specific make and model.
Final Takeaways:
By following these steps, you can effectively use a chainsaw drive link calculator to determine the total number of drive links required for your chainsaw chain based on the chain length, chain pitch, and bar length.
- Stihl GTA 26 Garden Pruner Mini Chainsaw Review - September 16, 2023
- Stihl MS260 vs 261 – [Battle of Power and Reliability] - August 16, 2023
- Husqvarna 120 Mark II vs Stihl MS 170 – [Detailed Comparison] - August 1, 2023